What's the Telsmith Cone Crusher Parts?

Telsmith cone crusher parts mainly divided into two parts. Wear and spare parts.

Wear Parts

These are the parts that directly interact with the rock and wear out most frequently. 

1. Mantle: It's mounted on the main shaft.

2. Bowl Liner (Cone Crusher Concave): The rock is crushed between the mantle and the bowl liner.

3. Feed Plate (mantle nut cap): Sits at the top of the crusher, just under the feed hopper. 

4. Torch Ring: A sacrificial ring that sits at the top of the crusher. It protects the head and mainframe from damage caused by welding during liner changes or from extreme wear.

Mechanical & Hydraulic System Parts

These parts are responsible for the crusher's movement, adjustment, and protection.

1. Main Shaft: It transmits the gyrating motion from the eccentric assembly.

2. Eccentric Assembly: It consists of an inner eccentric bushing and an outer eccentric bushing. 

3. Head & Main Shaft Assembly: This is the assembly that includes the main shaft, crusher mantle, and other components that actually gyrate.

4. Hydraulic Cylinders: Used to adjust the crusher's closed-side setting (CSS) for product size control and to provide overload protection (e.g., tramp iron relief). If uncrushable material enters, the hydraulic system allows the cylinder to lower, letting the material pass, and then returns to the original setting.

5. Clamping Cylinder: Holds the adjustment ring in place to maintain the CSS.

6. Springs or Accumulators: In some models, these provide the return force for the tramp relief system.

You can contact us to know more about Telsmith parts. Here are some main part numbers for Telsmith as follows: