Call Us:+86 186 5551 2307
Mail Us:jhon@onaie.cn
ONA manufactures direct-fit covers for GP series cone crushers, one factory from casting to final inspection, one standard for every model.
Item No :
GP100, GP100SPart Number :
ONA-386960, ONA-MM0243918Payment :
TTProduct Origin :
ChinaColor :
CustomizedShipping Port :
ShanghaiLead Time :
STOCKOrder(MOQ) :
1
The cover, also known as the distribution plate, is mounted on top of the head assembly of a cone crusher. Its job is to receive the incoming feed and spread it evenly around the crushing cavity, ensuring uniform liner wear, stable crusher loading, and consistent product gradation. A worn or cracked cover lets feed fall to one side, causing localized wear on the mantle and concaves, uneven crushing, and costly downtime. ONA's cover, is cast from wear-resistant alloy steel and precision-machined to OEM dimensions, fully interchangeable and suitable for Metso Nordberg GP series cone crushers. Every cover is dimension-checked and hardness-tested before dispatch. Covers suitable for Metso GP11F, GP100S, GP200S, GP300 and GP550 series are also available from ONA.
Installation Position & Notes
Eg: ONA-912509, GP200S Cone Crusher Cover

| Pos. | Part Number | Description | Qty | Net Wght |
| 1 | ONA-945384 | Lower Frame Assembly | 1 | 4280 |
| 2 | ONA-916174 | Upper Frame Assembly | 1 | 2550 |
| 3 | ONA-916173 | MAIN SHAFT ASSEMBLY | 1 | 1950 |
| 8 | ONA-912509 | COVER | 1 | 53.8 |
| 9 | ONA-941535 | THRUST BEARING | 1 | 47.5 |
| 10 | ONA-495365 | SCREW RMVNG M48X90 G-SERIES@ | 4 | 2.2 |
| 11 | ONA-924011 | Protection Cover | 20 | 0.1 |
| 12 | ONA-932975 | SPLASH GUARD | 1 | 0.61 |
| 15 | ONA-704405693350 | KEY, PARALLEL, RECTANGULAR | 1 | 0.23 |
| 17 | ONA-909070 | O-RING | 1 | 0.06 |
| 18 | ONA-404107470030 | BOLT, HEXAGONAL | 20 | 1.72 |
| 19 | ONA-7001530420 | SCREW, HEXAGONAL | 4 | 0.2 |
| 20 | ONA-704203927300 | NUT, SELF-LOCKING | 4 | 0.22 |
| 21 | ONA-704203927360 | NUT, SELF-LOCKING | 20 | 0.38 |
| 22 | ONA-704007290000 | PLAIN WASHER | 20 | 0.09 |
| 23 | ONA-704007130000 | WASHER, PLAIN | 4 | 0.02 |
| 24 | ONA-708801061000 | Grease | 1 | |
| 25 | ONA-708800865000 | GEAR OIL | 1 | |
| 26 | ONA-708801056000 | Grease | 1 | |
| 27 | ONA-MM0275808 | MACHINE PLATE | 1 | 0.2 |
| 28 | ONA-704207320000 | PIN, GROOVED, WITH HEAD | 4 | 0.01 |
| 31 | ONA-MM0247466 | Tool and Equipment | 1 | 42 |
| 32 | ONA-704003080000 | Cylindric Pin | 2 | 0.02 |
| 33 | ONA-704005590000 | Washer, Lock | 1 | 0.01 |
| 34 | ONA-N01530333 | BOLT, HEXAGONAL | 1 | 0.23 |
📍Position: The cover (Part No. ONA-912509) is bolted on top of the head assembly, directly above the mantle. It spreads incoming feed evenly into the crushing cavity.
🔧Installation: Clean the mating face and check the bolt holes before fitting. Tighten the fasteners evenly in a cross pattern.
🔍Inspection: Check the cover at every liner change. If the surface is thin, grooved, or worn off-center, replace it together with the mantle.
Data Sheet
| Production Name | Cover |
| Material | Wear-resistant Alloy Steel Casting |
| Applicable Models | Suitable for Metso Nordberg GP Series Cone Crusher |
| HS Code | 847490 |
| Brand | ONA |
| Function | Mounted on Top of the Head Assembly; Spreads Incoming Feed Evenly Around the Crushing Cavity |
| Manufacturing Process | Precision Casting + CNC Machining to OEM Drawings |
| Quality Control | 100% Dimension Inspection & Hardness Test Before Dispatch |
| Surface Treatment | Anti-rust Paint On Machined Surfaces |
ONA Product Gallery
All parts below are produced in ONA's own factory, under one quality control system. Covers suitable for Metso GP, feed cones suitable for Metso HP and MP, distributor plate/ spider cap dome / wearing cap suitable for Sandvik CS and CV, distributor plates suitable for Metso Barmac VSI, and feed plate suitable for Symons — one supplier covers them all.
GP100 cone crusher cover ONA-386960; GP100S cone crusher cover ONA-MM0243918
HP200 cone crusher, feed cone ONA-7065558051; HP300 cone crusher, feed cone ONA-7065558093
HP6 cone crusher,feed cone ONA-N65558322; HP300 cone crusher,feed cone ONA-N65558321
HP400 cone crusher, feed cone ONA-1055981158; HP500 cone crusher, feed cone ONA-1055981159
CV228 VSI crusher, distributor plate ONA-488.0076-001; CS660 cone crusher, spider cap dome / wearing cap, ONA-452.5862-901
Barmac VSI crusher and Symons cone crusher, feed plate ONA-5598 4581
ONA Hot-Selling Part Numbers
The table below lists ONA's most-requested feed distribution parts. Find your reference number and send us an inquiry — all items are in regular production.
| 🔥🔥🔥COVER/FEED PLATE/FEED CONE/DISTRIBUTOR/DISTRIBUTOR PLATE | |||||
| ONA-386960 | ONA-N65558322 | ONA-N98001023 | ONA-SN507160 | ONA-7065558050 | ONA-N65558006 |
| ONA-MM0260737 | ONA-N65558252 | ONA-7065558093 | ONA-B69274120C | ONA-7065558000 | ONA-5598-7941 |
| ONA-912509 | ONA-SN204086 | ONA-N65558321 | ONA-MM0368073 | ONA-1055988675 | ONA-MM1887608 |
| ONA-340082 | ONA-1055981159 | ONA-N98000008 | ONA-MM0372243 | ONA-1055988676 | ONA-SN792033 |
| ONA-MM0572854 | ONA-B96394120F | ONA-7065558094 | ONA-1055988781 | ONA-488.0770-001 | ONA-7065558201 |
| ONA-MM0243918 | ONA-MM0361751 | ONA-1055985805 | ONA-N90058318 | ONA-488.0076-001 | ONA-7065558351 |
| ONA-582360 | ONA-1055981158 | ONA-1055988665 | ONA-N98000821 | ONA-5598 4161 | / |
| ONA-1055981161 | ONA-N65558201 | ONA-B96394120C | ONA-N65558054 | ONA-5598 4581 | / |
| ONA-7065550291 | ONA-B96394120E | ONA-B96394120B | ONA-7065558051 | ONA-C-272-454 | / |
Why ONA Covers Last Longer

ONA casts, machines, and inspects every cover in one factory — no outsourced step sits between the drawing and the shipping crate, so the part that arrives matches the part you ordered.
✅️Full model coverage: Covers suitable for Metso GP11F, GP100S, GP200S, GP300, and GP550 — not just the popular sizes.
✅️Casting and machining under one roof: One team controls material, heat treatment, and final dimensions, so tolerances stay consistent from batch to batch.
✅️100% inspected, not sampled: Every cover is dimension-checked and hardness-tested before packing; reports are available on request.
✅️Bolt-on fit: Machined to OEM dimensions, so the cover seats on the head assembly without on-site rework.
✅️Technical support in 48 hours: Send a drawing, a part number, or a photo of a worn cover — our engineers respond with a match and a price.
Customization & Export Packing

ONA ships covers the way your warehouse needs them, not the way they leave the foundry.
1. Custom paint color: Standard is anti-rust primer; we can match any RAL color or your plant's existing paint code.
2. Neutral or private-label packing: Ship with ONA marking, plain marking, or your own label — your choice.
3. Sea-worthy plywood case: Fumigation-free plywood, with reinforced corners for stacked container loading.
4. Full anti-rust protection: Machined faces are oil-coated and wrapped in VCI film to survive long sea transit in humid climates.
5. Mixed shipments welcome: Combine covers with mantles, concaves, or feed cones in one container — one order, one bill.
FAQ
1: How do I choose the right cover?
Send us your part number or a photo of the old part. Our engineers will confirm the match before production.
2: What material is the cover made of?
Wear-resistant alloy steel casting. Other grades are available on request.
3: Can you also supply distribution parts for other crushers?
Yes. ONA supplies parts suit for Metso GP, HP, MP, and Barmac B9600, as well as Symons 7SH and Sandvik CH series — one supplier for all.
Our hours
Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)