Call Us:+86 186 5551 2307
Mail Us:jhon@onaie.cn
ONA manufactures lubrication unit suit for Sandvik CJ series jaw crushers, covering CJ412, CJ612, CJ613 and CJ615.
Item No :
CJ412, CJ612, CJ613, CJ615Part Number :
ONA-914.0211-00Payment :
TTProduct Origin :
ChinaColor :
CustomizedShipping Port :
ShanghaiLead Time :
20 DaysOrder(MOQ) :
1
The lubrication unit is a compact automatic grease lubrication system suitable for Sandvik CJ series jaw crushers, as well as the legacy JM series (such as CJ615 / JM1511). Mounted in a sealed steel enclosure, its electric pump draws grease from a transparent reservoir and feeds a measured dose to the crusher's main bearings through a progressive distributor. These bearings carry every shock of primary crushing, where dust and heat never stop. If lubrication fails, bearings seize and the whole stone crushing plant halts for repairs. As one of the key jaw crusher spare parts, a dependable lubrication system is the cheapest insurance for continuous production. ONA builds this unit to match the original mounting and piping layout, so whether your machine is labeled CJ or JM, it bolts straight onto the crusher.
Data Sheet
| Production Name | Lubrication Unit |
| Material | Welded & Pickled Steel Cabinet / Reservoir with Precision-Machined Pump Components; Anti-Corrosion Coated |
| Applicable Models | suit for Sandvik CJ412 / CJ612 / CJ613 / CJ615 Jaw Crushers |
| HS Code | 847490 |
| Brand | ONA |
| Lubrication Type | Automatic Grease Lubrication — Electric Pump Group + Progressive Distributor Block |
| Quality Assurance | 100% Pressure Leak Test & Pre-Delivery Run Test; Pressure and Level Switch Signals Checked (Reports available) |
| Packaging | Plywood Case with Waterproof Film, Suitable for Sea Freight |
Product Show
ONA-914.0211-00, CJ412/CJ612/CJ613/CJ615 Jaw Crusher Lubrication Unit
Why ONA Beats Low-Price Competitors
1. Material: ONA builds the unit on a welded, pickled steel reservoir with pressure-tested seams and an anti-corrosion coating rated for wet, dust-laden plant air. Low-price copies often use thin, untreated sheet and untested welds — fine on the showroom floor, but leading to leaks under typical outdoor conditions.
2. Workmanship: Every ONA unit is assembled on a rigid base plate, piped to the original routing, and run on a test bench before delivery: pump pressure, distributor cycling, relief valve setting, and switch signals are all checked and recorded. Low-price units are typically bench-assembled but never run — you become the test bench.
3. Precision: Mounting holes, port positions, and terminal definitions are machined to the original drawing, so the unit bolts onto your CJ crusher without re-drilling or rewiring. Low-price units work to "close enough" dimensions, and the differences surface during installation — as extra shifts, adapters, and rework.
The Real Cost: A cheap unit that leaks, mis-meters, or needs two days of on-site adaptation costs more than an ONA unit that bolts on and runs. Price the downtime, not the invoice.
| ONA vs Low-price Suppliers — Lubrication Unit | ||
| Item | ONA | Low-price Suppliers |
| Reservoir & welds | Leak-tested, coated | Untested, bare |
| Pre-delivery run | 100% bench-tested | No run test |
| Dimensions & ports | To original drawing | "Close enough" |
| Consistency | One QC standard | Varies by batch |
| What you really pay | Downtime | Only the invoice |
Where This Lubrication Unit Works
✅️Fixed primary crushing stations: In quarries and hard-rock mines, the CJ-series jaw crusher runs the primary circuit ten or more hours a day. Here material and build standard decide service life: the welded, pickled steel reservoir is leak-tested and coated, and every ONA unit passes a 100% bench run — pump pressure, distributor cycling and switch signals — before leaving the factory.
✅️Mobile crushing plants: Track-mounted and wheel-mounted CJ-class plants add travel shocks, tighter enclosures and shorter maintenance windows. Machined to the original drawing — mounting holes, port positions and terminal definitions — the unit bolts on without re-drilling or rewiring, keeping each swap within one planned shift.
✅️High-abrasive aggregate lines: Recycled concrete, river gravel and blasted granite all push fine, abrasive dust into bearing seals. Wear-resistant pump components hold up under this duty, and because seals, tubing and pump parts are stocked through our direct manufacturing channel, spares ship in weeks, not months.
More Crusher Parts Available

1. Complete parts coverage suitable for Sandvik CJ series jaw crushers
The image shows a selection of ONA's replacement parts for the CJ series, including:
CJ408 / CJ412 Jaw plates (ONA-400.0780, ONA-400.0779) ;
CJ211 Progressive feeder-ONA-400.1610-901;
CJ615 / JM1511 Toggle Seat Holder-ONA-402.4508-01;
Supporting spares — flexible coupling, cheek plates, toggle plates, bearing housings, and other parts on request.
2. Also suitable for Metso jaw crushers
Because ONA manufactures to original drawings for the whole crusher, this expertise extends to other major brands, covering C series from C63 to C160 (C80, C100, C110, C120, C125, C140, C160);
Wear parts for the same range: jaw plates, cheek plates, and bronze bushes produced in our own foundry;
ONA manufacturing standard for drawing-based production, 100% pre-delivery inspection, test reports on request.
Company Profile

Ma'anshan Ona Intelligent Equipment Co., Ltd. (ONA) is an ISO 9001 and ISO 45001 certified manufacturer based in Ma'anshan, China, operating 35,000 m² of workshops with 200+ employees and an integrated production line covering precision casting, heat treatment, and CNC machining under one roof.
🏭Casting & Machining: Our foundry pours single pieces up to 13 tons at a daily capacity of 80 tons, and our CNC equipment machines parts up to 8 m long in hardness from HB200 to HRC62 — enabling us to deliver complete machined assemblies, not just castings.
🔧Quality & Supply: Every product is verified through spectrometer analysis, CMM measurement, and UT/MT/PT non-destructive testing, and with over USD 5 million of stock parts, we supply customers in more than 50 countries from original-drawing OEM production.
🚂Shipping & Delivery: Machined surfaces are sealed with anti-rust paper and PE film; complete units ship in plywood cases. Dispatch via Shanghai Port on EXW, FCA, CIF, or DDP terms — stock items within days, made-to-order parts on schedule, with test reports and photos.
FAQ
1. What CJ series models does this lubrication unit cover?
It is compatible with CJ412, CJ612, CJ613, and CJ615 jaw crushers. Please provide your crusher's serial number, and we will confirm the exact mounting variant before production.
2. Is it difficult to install this unit on site?
Not at all. The mounting holes, port positions, and terminal definitions are machined to the original drawing, ensuring a hassle-free bolt-on installation.
3. Do you offer lubrication units for other crusher models?
Yes. Besides the CJ series, we also manufacture matching lubricating devices suitable for Metso Nordberg C series jaw crushers. Please contact us with your specific model.
Our hours
Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)