Call Us:+86 186 5551 2307
Mail Us:jhon@onaie.cn
The spider cap is a critical protective and functional part located on the spider at the top of suitable for sandvik cone crusher.
Item No :
H3800, H7800Part Number :
ONA-442.7976-01, ONA-452.0553-001Payment :
TTProduct Origin :
ChinaColor :
CustomizedShipping Port :
ShanghaiLead Time :
40 DaysOrder(MOQ) :
1
The spider cap (also known as the upper spider cap) is a critical protective part located at the top of the spider assembly in CH/cs series cone crushers. Installed on the upper section of the spider (the frame supporting the main shaft). it absorbs the impact of incoming material and prevents crushed stone, mineral fines, dirt, and debris from entering the areas housing the spider bushings. the main shart and the bearings. By sealing out dust and impurities, it protects the internal precision bronze bushings and bearings from abrasion and scoring. while helping to maintain the concentricity of the main shaft. As a vital spare part, it plays a key role in minimizing damage to the spider assembly and reducing equipment downtime.
Data Sheet
| Production Name | Spider Cap |
| OEM Number | ONA-442.7976-01, ONA-452.0553-001 |
| Brand | ONA |
| HS Code | 847490 |
| Main material | Mn18Cr2 High-Manganese Steel/ High-Strength and High-Toughness Cast Steel |
| Form of supply | Standard models in stock; Customize by drawing or part number |
| Recommended Pairings | Replace in conjunction with the dust seal and arm bushing |
⚠️ Note: Outer diameter, inner bore, thickness, bolt hole configuration, and unit weight vary by model. Please provide the specific machine model or the original manufacturer part number when placing an order to ensure an accurate match.
Product Advantages

Example of installation location: Eg: CH430 Cone Crusher ONA-442.7976-01.
✅ Impact-Resistant and Wear-Resistant Material: Cast from high-manganese steel/alloy steel; features work-hardening properties, high impact resistance, and excellent fatigue resistance.
✅ Direct OEM-Fit: Precision-machined via CNC for accurate hole alignment—no grinding required. Compatible with various models in the CH/CS series.
✅ Dual-Layer Protection for Cost Savings: Includes a protective arm to cushion the impact of falling material, plus a copper sleeve to block dust, effectively reducing the need for maintenance.
✅ Rigorous Quality Control & Flexible Supply: Undergoes flaw detection to ensure zero defects; treated with anti-rust coating. Available for immediate delivery or custom orders.
Key Points for Installation and Maintenance

When installing the spider cap, pay particular attentionto the assembly status of the mounting bolts, O-rings, and related sealing components to ensure a reliableseal and accurate positioning.
✅ Installation Check: Ensure mating surfaces are free of burrs and that sealing surfaces are clean.
✅ Tightening Torque: Secure fasteners following the torque values and sequence specified in the manual to prevent loosening.
✅ Periodic Inspection: Replace components promptly if deformation, cracking, or dents are detected; ensure protection against dust ingress.
✅ Concurrent Assessment: It is recommended to check the clearance of the boom’s copper bushings whenever the cap is replaced.
❌️ Warning - Installation Hazards
If the spider cap is not installed or tightened correctly, crushed stone dust can enter and contaminate the lubrication chamber. This accelerates wear on the main shaft and arm bushings, and in severe cases, can lead to the complete destruction of the entire arm assembly.
Product Showcase
H7800 Cone Crusher ONA-452.0553-001

H3800 Cone Crusher ONA-442.7976-01

Below are the part numbers for the spider caps related to ONA
| ONA-452.3841 | CH660 | ONA-BG01116737 | H7800 |
| ONA-07-244-052-006 | SG4265 | ONA-442.7492-01 | H4800 |
| ONA-07-248-700-001 | SG6089 | ONA-454.2831-001 | CG820 |
| ONA-442.8362-01 | H2800/S2800 | ONA-442.9164-01 | S4800 |
| ONA-442.8520-00 | S3800 | ONA-452.0266-001 | H8800 |
| ONA-442.8753-01 | H6800 | ONA-452.3841-001 | H6800 |
| ONA-BG01116734 | CH440 | / | / |
ONA offers top-side wear parts suitable for Sandvik CH/CS/H series crushers. Manufactured to original factory standards, these parts are available for customization/OEM and facilitate quick replacement to minimize downtime.
FAQ
1. When should it be replaced?
Replace it if you notice cracks, severe dents, or deformation of the mounting holes.
2. What is the function of the spider cap?
It cushions the impact of falling material, blocks dust and debris, and protects the arm, the internal copper bushing, and the main shaft.
3. What else should be considered during replacement?
It is recommended to simultaneously check the clearance of the boom's copper bushings to prevent dust ingress from causing latent damage.
Our hours
Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)