Call Us:+86 186 5551 2307
Mail Us:jhon@onaie.cn
The support ring is a critical structural load -bearing part located in the upper frame area of Suitabble for Sandvik cone crushers.
Item No :
CH660, H6800Part Number :
ONA-442.8793-01Payment :
TTProduct Origin :
ChinaColor :
CustomizedShipping Port :
ShanghaiLead Time :
STOCKOrder(MOQ) :
1
The cone support ring is a critical load -bearing component suitable for sandvik cone crusher assemblies. Itsupports the stationary cone liner, absorbs crushing impact loads and ensures both the coaxial alignment of the stationary cone and operational stability. It serves as a frequenty replaced wear part in mining and aggregate crushing operations. Manufactured in strict accordance wth original equipment manufacturer (OEM) drawings, these rings feature precise dimensions and a tight fit, allowing for direct replacement of original parts. They are well-suited for applications in mining, quarrying, aggregate processing, and the crushing of metallic ores.
Data Sheet
| Production Name | Support Ring |
| OEM Number | ONA-442.8793-01 |
| HS Code | 847490 |
| Brand | ONA |
| Material | The core material is cast steel. |
| Customization Capabilities | Manufactured according to drawings/part numbers; material adjusted based on operating conditions. |
Product Advantages

Installation Location: Eg: ONA-442.9750
✅ Load Support and Transfer: Secures the stationary cone liner and transmits crushing, compressive, and impact forces to the main frame.
✅ Radial Displacement Control: Restricts liner movement to maintain the geometric precision of the crushing chamber and ensure consistent discharge particle size.
✅ Vibration Absorption: Dampens crushing-induced vibrations, preventing them from reaching the main frame and thereby protecting its structural integrity.
✅ Key Advantages: Crafted from high-strength alloy cast steel; designed as a direct, OEM-specification replacement; effectively extends the service life of the main frame and reduces overall maintenance costs.
Installation and Maintenance Tips

Before installation: Clean and adjust the mating surfaces of the adjustment ring and the stationary cone; remove any burrs, old rust, or hard debris. Do not install the support ring if its end face shows indentations, cracks, or deformation.
Installation and inspection: Ensure uniform contact across the mating surfaces. Never strike a single point to force the component into place, and keep the end face level. During scheduled shutdowns, inspect the support ring’s end face for indentations, cracks, or deformation. If issues such as unstable material discharge, abnormal vibration, or difficulty in accurately adjusting the discharge opening occur, the support ring should be the first component to be checked.
Replacement recommendation: Inspect the support ring whenever the stationary cone liner is replaced. If there are signs of significant crushing, warping, or cracking, it is recommended to replace the support ring as well to protect the adjustment ring and the main unit.
⚠️ Note: The support ring for the fixed cone is a structural load-bearing component. Before installation, please verify that the part number matches the specific machine model; also, ensure that the mounting surface on the upper frame is clean and that the torque applied to fasteners complies with the requirements specified in the equipment manual. Dimensions and weights of support rings vary significantly between different models; please refer to the actual component or the manufacturer’s official data for precise specifications.
Product Image Gallery
CH420 ONA-442.9570
CH440 ONA-442.8425-01

CH430 ONA-442.8020-01

ONA provides a long-term supply of spare parts suitable for Sandvik CH/CS/H series cone crushers—including main frame support rings, liners, bushings, and adjustment rings. Manufactured according to original factory specifications, these parts are available for custom orders and as OEM-compatible components. With flexible minimum order requirements, we help customers replace parts quickly and minimize equipment downtime.
Below are some related support rings for ONA
| ONA-442.8793 | CH660 | ONA-452.1973 | S3800 | ONA-442.8020-01 | H3800/S3800 |
| ONA-N80500721 | HP6 | ONA-452.1974 | S3800 | ONA-442.8801-01 | H6800 |
| ONA-07-244-166-001 | SG4265 | ONA-442.8098 | S4800 | ONA-442.8425-01 | H4800 |
| ONA-N80500609 | HP4 | ONA-442.8114 | S4800 | ONA-442.9313-01 | H8800 |
| ONA-442.855 | S2800 | ONA-452.0273 | S4800 | ONA-452.0687-01 | H7800 |
| ONA-442.8522 | S2800 | ONA-452.0945 | S4800 | ONA-452.0419-001 | H8800 |
| ONA-442.8477 | S3800 | ONA-452.1955 | S4800 | ONA-452.6045-001 | CH890/CH895 |
| ONA-442.8478 | S3800 | ONA-452.1972 | S4800 | ONA-1275.06.301-1 | KMD2200 |
| ONA-452.1464 | S3800 | ONA-17-300-807-001 | SG4265 | / | / |
| ONA-452.1952 | S3800 | ONA-442.7103-01 | H4800/S4800 | / | / |
FAQ
1. Which models is it compatible with?
It is suitable for Sandvik CH420/430/440/550/660/860i and s420/430/440 cone crushers. Please provide the model or part number for precise verification.
2. Are there installation instructions?
We can provide basic installation guidelines, and you are welcome to contact customer service if you have any questions.
3. Does it require sanding or resizing upon receipt?
Precision CNC-machined to exact tolerances -ready for direct installation with no further processing required.
Our hours
Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)